What to do if my Fisher & Paykel Washer is not spinning properly?
If your Fisher & Paykel Washer isn't spinning properly, it could be due to an unbalanced load. Pause the washer and manually redistribute the clothes. Also, check that the washer is level and doesn't rock in any direction.
How to fix a Fisher & Paykel WashSmart that is not turning on?
If your Fisher & Paykel Washer isn't turning on, there are a few things to check. First, make sure the power is switched on at the wall; try switching it off, waiting 60 seconds, and then switching it back on. Next, verify your household power supply is working by plugging in another electrical appliance. Finally, the Keylock feature might be activated; try holding down the ‘POWER’ button for 2 seconds.
Why is my Fisher & Paykel WashSmart Washer not filling with water?
If your Fisher & Paykel Washer isn't filling with water, start by checking that both the hot and cold inlet taps are turned on. Next, inspect the inlet hose filters for any blockages and clear them. Also, check if the ‘Delay Start’ function is set.
How to reduce noise from my Fisher & Paykel Washer?
If your Fisher & Paykel Washer is making unusual noises, it's likely due to an unbalanced load. Try pausing the washer and redistributing the items inside.
How to prevent creasing in my Fisher & Paykel WashSmart Washer?
To minimize creasing in your Fisher & Paykel Washer, avoid overloading it by reducing the load size. Select the ‘Delicate’ cycle, as it's designed to reduce creasing. Also, try selecting a lower spin speed and wash temperature.
What to do if my Fisher & Paykel Washer is filling continuously?
If your Fisher & Paykel Washer is filling continuously, make sure the drain hose is correctly installed in the standpipe or tub. To prevent siphoning, ensure the drain hose does not extend more than 20 mm from the end of the hose guide.
How to improve soil removal in my Fisher & Paykel WashSmart?
If your Fisher & Paykel Washer isn't effectively removing soil, consider whether you're using the most appropriate wash cycle for the amount of dirt. Also, check the detergent package for the manufacturer's recommended dosage and ensure you're using enough for the load size and soil level.
Why does the spin speed sound slower than normal on my Fisher & Paykel WashSmart?
If the spin speed of your Fisher & Paykel Washer sounds slower than normal, it may be continually going out of balance due to unevenly distributed clothes in the bowl. Also, ensure an appropriate water level is selected for the load size.
How to reduce linting in my Fisher & Paykel WashSmart?
To reduce linting in your Fisher & Paykel Washer, wash lint givers (like towels and flannelette sheets) separately from lint collectors (like synthetic fabrics). Also, avoid overloading the washer by reducing your load size.
How to prevent tangling in my Fisher & Paykel WashSmart Washer?
To prevent tangling in your Fisher & Paykel Washer, select an appropriate water level for the load size, or select ‘Auto’ water level, because washing with too much water (underloading) can cause the clothes to tangle around one another.
General| Capacity | 8.5 kg |
|---|---|
| Spin Speed | 1400 RPM |
| SmartDrive Technology | Yes |
| Auto Water Level | Yes |
| Wash Programs | 6 |
| Control Type | Electronic |
Lists the accessories included with the washer.
Steps for unpacking and removing transit bolts before operation.
Guidance on washer placement and levelling for optimal performance.
Instructions for connecting inlet hoses and important water supply warnings.
Guidance on drain hose height, placement, and siphoning prevention.
Steps for electrical connection and crucial safety warnings.
Lists available spare parts for the washer.
Procedure to test the washer's functionality after installation.
Essential safety guidelines for operating the washing machine.
Technical specifications and physical dimensions of the washer models.
Guide to initial operation for WashSmart models.
Guide to initial operation for QuickSmart models.
Explanation of the main control dial for cycle selection.
Description of the function buttons and indicators.
Understanding the digital display, time, progress lights, and keylock.
Door locking mechanism, adding items during wash, and power failure door opening.
Guidance on sorting clothes by color, fabric, and soil type for washing.
Essential checks before loading and efficient loading practices.
Choosing and placing detergent, including pods and pre-wash options.
Guidance on detergent amounts, advice, and fabric softener use.
Explanation of 'scrud' build-up and how to prevent it.
Detailed descriptions of available wash cycles for WashSmart models.
Detailed descriptions of available wash cycles for QuickSmart models.
Adjusting wash temperature, spin speed, and soil level settings.
Using Pre Wash, Rinse+, Wrinkle Free, and Eco options.
How to add or remove items during a wash cycle on WashSmart models.
Using the keylock function and setting a delayed start for cycles.
Steps to program custom cycles and reset to factory defaults.
Cleaning the exterior, control panel, and dispenser drawer.
Instructions and steps for performing a drum clean cycle.
How to clean the drum and door seal for hygiene.
Detailed steps for cleaning the pump filter to prevent blockages.
Cleaning inlet hoses and preparing the washer for moving.
Interpreting error codes and common user-solvable issues.
Troubleshooting common issues related to the washer door.
Troubleshooting problems with turning on the machine and water filling.
Addressing mid-cycle stops, continuous draining, and no draining issues.
Troubleshooting continuous filling, poor rinsing, and improper spinning.
Addressing excess suds, leaks, and variations in cycle times.
Troubleshooting detergent dispenser residues and wet clothes after washing.
Identifying and resolving issues causing excessive vibration.
Tips for preventing creasing, poor soil removal, dye transfer, marks, and tangling.
Checks to perform before calling for assistance or parts.
To Next Page