What to do if my Fisher & Paykel Washer is not spinning properly?
If your Fisher & Paykel Washer isn't spinning properly, it could be due to an unbalanced load. Pause the washer and manually redistribute the clothes. Also, check that the washer is level and doesn't rock in any direction.
How to fix a Fisher & Paykel WashSmart that is not turning on?
If your Fisher & Paykel Washer isn't turning on, there are a few things to check. First, make sure the power is switched on at the wall; try switching it off, waiting 60 seconds, and then switching it back on. Next, verify your household power supply is working by plugging in another electrical appliance. Finally, the Keylock feature might be activated; try holding down the ‘POWER’ button for 2 seconds.
Why is my Fisher & Paykel WashSmart Washer not filling with water?
If your Fisher & Paykel Washer isn't filling with water, start by checking that both the hot and cold inlet taps are turned on. Next, inspect the inlet hose filters for any blockages and clear them. Also, check if the ‘Delay Start’ function is set.
How to reduce noise from my Fisher & Paykel Washer?
If your Fisher & Paykel Washer is making unusual noises, it's likely due to an unbalanced load. Try pausing the washer and redistributing the items inside.
How to prevent creasing in my Fisher & Paykel WashSmart Washer?
To minimize creasing in your Fisher & Paykel Washer, avoid overloading it by reducing the load size. Select the ‘Delicate’ cycle, as it's designed to reduce creasing. Also, try selecting a lower spin speed and wash temperature.
What to do if my Fisher & Paykel Washer is filling continuously?
If your Fisher & Paykel Washer is filling continuously, make sure the drain hose is correctly installed in the standpipe or tub. To prevent siphoning, ensure the drain hose does not extend more than 20 mm from the end of the hose guide.
How to improve soil removal in my Fisher & Paykel WashSmart?
If your Fisher & Paykel Washer isn't effectively removing soil, consider whether you're using the most appropriate wash cycle for the amount of dirt. Also, check the detergent package for the manufacturer's recommended dosage and ensure you're using enough for the load size and soil level.
Why does the spin speed sound slower than normal on my Fisher & Paykel WashSmart?
If the spin speed of your Fisher & Paykel Washer sounds slower than normal, it may be continually going out of balance due to unevenly distributed clothes in the bowl. Also, ensure an appropriate water level is selected for the load size.
How to reduce linting in my Fisher & Paykel WashSmart?
To reduce linting in your Fisher & Paykel Washer, wash lint givers (like towels and flannelette sheets) separately from lint collectors (like synthetic fabrics). Also, avoid overloading the washer by reducing your load size.
How to prevent tangling in my Fisher & Paykel WashSmart Washer?
To prevent tangling in your Fisher & Paykel Washer, select an appropriate water level for the load size, or select ‘Auto’ water level, because washing with too much water (underloading) can cause the clothes to tangle around one another.
General| Capacity | 8.5 kg |
|---|---|
| Spin Speed | 1400 RPM |
| SmartDrive Technology | Yes |
| Auto Water Level | Yes |
| Wash Programs | 6 |
| Control Type | Electronic |
To Next Page