EasyManuals Logo

Fisher & Paykel CT560QX User Manual

Fisher & Paykel CT560QX
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Sol X Dual element controls
4
1
3 2
Dual element control
The left front element is designed for dual element control, using either the inner or full
element.
1
With the cooktop turned on, touch the
button in the touch controls. The red light
will stop flashing and remain static.
2
Select the element temperature setting,
using the arrows as required. Only the
inner element will come on. (Remember
the cooktop regulates the element
temperature, and you may notice the
element turn off and back on again).
3
To select the full element, touch the button. Note: You cannot select the full element until
you have set the temperature.
4
A red light will show beside the
button, when the full element is selected. You can modify
the full element temperature with the arrows.
To return to the inner element only, touch the button again. The dual setting is cleared
when the cooktop is turned off.
Auto heat-reduce
Your Sol X cooktop has an effort saving function, to quickly bring your element to the
maximum temperature setting (9), then automatically reduce the element temperature setting
to maintain a lower heat to cook your food at. This limits the risks of spill overs and burning.
Ideal for boiling water for pasta and then automatically lowering the heat and maintaining a
rapid simmer until al dente.
To set the function, turn the element on by touching the corresponding element button.
Using the arrows scroll past 9 to display . When is showing, use the arrows again to select
the temperature setting you would like the element to reduce to.
The temperature settings of 1-9 you set the element to reduce to, correspond with the
same temperature settings for standard element use, 1 being low and 9 being high. Every
temperature setting between 1 and 9 has a different fixed time. (Refer to the Auto Heat-
Reduce Guide’).
Eg. Auto Heat Reduce 6 setting, will heat and maintain the element to the maximum
temperature (9), for 2.5 minutes. After the time has elapsed, the element will reduce to the
lower temperature setting of 6 and maintain this until the element or cooktop is turned off.
Please note, the maximum temperature (9) never reduces.
8 9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fisher & Paykel CT560QX and is the answer not in the manual?

Fisher & Paykel CT560QX Specifications

General IconGeneral
BrandFisher & Paykel
ModelCT560QX
CategoryCooktop
LanguageEnglish

Related product manuals