Clean Dishes Indicator (LCD models only)
Feature
Benefit
The clean dish indicator option can be turned on, where the 00 symbol
will remain in the electronic display after a wash program has finished
to indicate the dishes are clean.
Useful where dishes have been left in the DishDrawer® and the user
cannot remember if they are clean or dirty, or in situations where
household members regularly remove only a few clean dishes without
emptying the drawer.
Fault Codes
Feature
Benefit
If a fault has occurred, the DishDrawer® will continuously beep every
second and a fault code will be displayed that is identifiable on a chart
in the user guide.
Should a fault occur, fault codes help the user identify the problem so
that they can correct it themselves or inform the Authorised Service
Centre to help them respond to the request.
Rinse Aid Dispenser and Rinse Aid Indicator Light
Feature
Benefit
Rinse aid gives a streak-free, sparkling clean
look to glass and chinaware and prevents
metal from tarnishing. The rinse aid
dispenser is located on the inside of the
drawer, underneath the detergent dispenser
and has a regulator that can be adjusted to
suit water conditions.
The rinse aid indicator light displays red when
rinse aid needs to be refilled. If the rinse aid
indicator light is dimly lit or not lit at all, there
is enough rinse aid for the wash.
The rinse aid dispenser is quick and easy to
fill, and the indicator light gives a visual
indication that the rinse aid dispenser needs
to be refilled.
Product Code: FPDD605
www.spaequip.com P: 707-737-1100 F: 707-737-1150 Page 18 of 18
To Previous Page
Loading...
Need help?
General
