Need help?Do you have a question about the Fisher & Paykel DD24DV2T9 and is the answer not in the manual?
General| Type | Built-in |
|---|---|
| Product Type | Dishwasher |
| Number of Place Settings | 7 |
| Energy Rating | Energy Star |
| Noise Level | 44 dBA |
| Finish | Stainless Steel |
| Control Type | Electronic |
| Number of Wash Cycles | 6 |
| Energy Star | Yes |
| Size | 24 inch |
| Features | Delay start |
| Number of Wash Programs | 6 |
| Drying System | Condensation drying |
Covers electrical, grounding, cut hazards, and essential safety precautions for installation and operation.
Detailed guidance on proper grounding procedures to prevent electric shock, adhering to local codes.
Lists and describes all parts provided for dishwasher installation, including hoses, brackets, and fasteners.
Steps for safely removing the drawer and accessing the power module for hardwiring.
Procedures for connecting mains wiring, reassembling covers, and refitting the drawer.
Key external dimensions of the dishwasher, including height, width, depth, and drawer extension.
Specifies internal cavity dimensions, adjacent space, and necessary clearances for cabinet installation.
Details for preparing the cavity, including power outlet location, water connection, and services hole.
Information on acceptable water pressure and considerations for kosher installations.
Specifies maximum allowable lengths for drain and inlet hoses, and power cord from the chassis edge.
Steps for attaching side brackets and pulling hoses/cord into the cavity.
Instructions for securing the dishwasher to the cabinetry on the sides and optionally the top.
Steps for removing the drawer and routing hoses/cord into the cavity.
Instructions for securing the dishwasher to the cabinetry on sides, bottom, and optionally the top.
Steps for correctly re-installing the dishwasher drawer onto its runners.
Instructions for marking, cutting, smoothing, and mounting the toekick panel.
Details three methods for connecting the dishwasher drain hose: standpipe, air gap, and sink trap.
Crucial reminder to verify drain connections meet all local plumbing codes and regulations.
Instructions for correctly fitting the rubber washer and securely tightening the water inlet coupling.
Addresses common issues like no water, leaks, beeping, and drawer problems with troubleshooting steps.
Comprehensive checklist for installers to verify all installation steps, connections, and appliance functionality.
To Next Page
