What to do if my Fisher & Paykel Dishwasher is leaking water?
If your Fisher & Paykel Dishwasher is leaking water, first, check and reconnect the drain hose to the waste pipe if it's disconnected. Next, ensure the inlet hose is securely connected. If the leaking persists, turn off the water and power supplies to the DishDrawer® and contact your dealer or an Authorised Service Centre.
What to do if my Fisher & Paykel DishDrawer® will not open?
If your Fisher & Paykel DishDrawer® will not open, first, ensure that the Childlock is turned off. Hold down the / button until the symbol disappears from the LCD screen or the light above the / button disappears. You may also need to press the / button to open the DishDrawer®.
Why are my dishes not drying in my Fisher & Paykel DD60DCM6 Dishwasher?
If your dishes are not drying in your Fisher & Paykel Dishwasher, make sure the dishes are not nesting together. Refill the rinse aid dispenser and consider increasing the rinse aid setting. Also, ensure you are using a standard wash programme.
Why are my dishes not clean in my Fisher & Paykel DD60DCM6?
There might be several reasons why your dishes are not getting clean in your Fisher & Paykel Dishwasher. Ensure you are using a suitable wash program, and that soils are not too heavily baked on. Check that no items are obstructing the spray arm path, and that you are loading the dishwasher correctly. Scrape all food scraps off dinnerware prior to loading and use recommended brands of dishwasher detergent. Also, clean the spray arm, filter plate, and drain filter. Refer to the detergent dispenser instructions and section ‘Wash programmes and detergent quantities’.
Why are there water marks on the dishes from my Fisher & Paykel DD60DCM6 Dishwasher?
If you notice water marks on your dishes after a cycle in your Fisher & Paykel Dishwasher, try refilling the rinse aid dispenser or increasing the rinse aid setting. Also, double-check the section on loading to ensure proper placement of items.
How to fix foaming during cycle in Fisher & Paykel DD60DCM6?
To address foaming during a cycle in your Fisher & Paykel Dishwasher, consult the section on ‘Wash programmes and detergent quantities’ or follow the detergent manufacturer’s instructions. You may also need to increase the amount of detergent or decrease the rinse aid setting.
What to do if there is water under the Fisher & Paykel DishDrawer®?
If you find water under your Fisher & Paykel DishDrawer®, make sure the drawer is firmly closed. Also, turn off the Keylock or Childlock by holding down the / button until the symbol disappears from the LCD screen or above the / button disappears. Press the button and ensure the drain hose(s) are straightened. Clean the filter plate/drain filter.
Why is my Fisher & Paykel DishDrawer® interior stained?
If the interior of your Fisher & Paykel DishDrawer® is stained, try pre-rinsing dishes before loading them. Alternatively, using the Rinse programme after adding the dishes may help minimize staining.
Why is my Fisher & Paykel Dishwasher making excessive motor noise?
If your Fisher & Paykel Dishwasher is making excessive motor noise, consult the ‘User maintenance instructions’ section for details on correct placement. You can also try running the DishDrawer® through a wash programme.
General| Width | 600 mm |
|---|---|
| Height | 820 mm |
| Energy Rating | 3.5 Stars |
| Noise Level | 44 dBA |
| Wash Programs | 6 |
| Finish | Stainless Steel |
| Number of Wash Cycles | 6 |
| Control Type | Electronic |
| Energy Star Qualified | Yes |
| Water Consumption | 11.5 L |
| Delay Start | Yes |
| Child Lock | Yes |
| Product Type | Dishwasher |
| Drying System | Condensing |
Critical safety precautions for operating the DishDrawer, covering general warnings.
Guidelines for safe installation, electrical grounding, and cord handling.
Safe practices for maintenance, cleaning, and operation, including specific usage rules.
Procedure for fuse replacement and advice on socket outlets and plugs.
Explanation of Power, Start/Pause, and Delay start buttons.
How to use Keylock, Childlock, and the wash programme selector.
Explanation of Power, Start/Pause, Delay start, and Lock buttons on LCD models.
Details on Keylock, Childlock, programme selection, and progress symbols for LCD models.
A concise guide covering loading, detergent, rinse aid, selection, and starting the wash.
Guidance on washing various materials like cutlery, aluminium, wood, glass, plastic, and decorated items.
Tips for loading the cutlery basket and using the small items container.
Alternative placement for small items container and use of the tablet tray.
Features for supporting glassware and folding tines for space optimization.
How to adjust racks and use the knife clip accessory.
Examples of loading for breakfast, dinner party, and heavy loads.
Advice on correct loading to ensure performance and avoid common mistakes.
Definition of water hardness and its effects on dishwashing performance and glassware.
Details of wash programmes and a table for detergent quantities based on water hardness.
Important safety notes, how to fill, and amount of detergent to use.
Advice on using tablets, especially for specific models and programmes, and placement options.
How to fill the dispenser, adjust the setting, and interpret the indicator light.
Guide to finding local water hardness and setting the appliance's water softener.
Instructions for filling the salt reservoir and understanding salt indicator lights.
Details on adjusting Rinse aid, Water softener, Auto power, Beeps, Closed drawer, and Clean dish options.
Steps to enter adjustment mode, scroll, make changes, and save settings.
Steps to adjust settings via the LCD display and save them.
Instructions for cleaning exterior surfaces and the drain filter.
Detailed guide on cleaning the spray arm and filter plate.
Instructions for correctly reassembling the filter plate, spray arm, and base rack.
Solutions for unclean dishes, foaming, water leaks, and drawer not opening.
Solutions for beeping, start failures, water issues, staining, drying, detergent, and noise.
How to identify fault codes and the general procedure for attending to them.
A table detailing F1-F9 fault codes, their causes, and corrective actions.
A table detailing U1, U4 fault codes, their causes, and corrective actions.
Steps to perform before calling for service and how to contact support.
Specific wash programme parameters for USA and Canada models.
Specific wash programme parameters for New Zealand and Australia models.
Specific wash programme parameters for Great Britain and Ireland models.
Parameters used for testing wash and dry performance in the USA and Canada.
Parameters used for testing wash and dry performance in NZ and Australia.
Parameters used for testing wash and dry performance in Great Britain and Ireland.
To Next Page