Why is my Fisher & Paykel Dishwasher beeping continuously?
If your Fisher & Paykel Dishwasher beeps continuously, it could be due to a few reasons. First, make sure the water supply is turned on. Second, inspect the drainage hose and connection for any blockages and ensure the spigot is drilled out. Finally, check the spray arm to ensure it is firmly seated and turns freely. If it has loosened, refit it.
What to do if water is leaking around my Fisher & Paykel DISHDRAWER DD24SHI9 Dishwasher connections?
If water appears around the water supply and drain connections of your Fisher & Paykel Dishwasher, inspect the hoses, connections, and existing plumbing for leaks. Also, verify that the rubber washer and hose clamp are correctly fitted.
Why no lights when I open my Fisher & Paykel DISHDRAWER DD24SHI9?
If no program indicator lights up when you open the drawer of your Fisher & Paykel Dishwasher, first ensure the power is connected and switched on. If that doesn't work, AUTO POWER-ON may need to be activated. Refer to your User guide for details.
What to do if my Fisher & Paykel DISHDRAWER DD24SHI9 Dishwasher drawer doesn't close?
If the drawer of your Fisher & Paykel Dishwasher doesn’t close properly, ensure that nothing is obstructing the drawer from closing, such as hoses or drawer latches.
How to align Fisher & Paykel Dishwasher front panels?
If the front panels of your Fisher & Paykel Dishwasher are misaligned to the surrounding cabinetry, start by checking if the cabinetry is square. Then, check and relevel the product. Unscrew the product from the cabinetry, adjust the feet to level the product, and re-secure it to the cabinetry.
General| Brand | Fisher & Paykel |
|---|---|
| Model | DISHDRAWER DD24SHI9 |
| Category | Dishwasher |
| Language | English |
To Next Page