Fisher & Paykel DS603SS User Manual

part number526607 0
08/2006
(page1of 12)
I
®
ishDrawer
TALLATI I T U TI
(NOTE:FORINTEGRATEDPANELPREPARATIONINSTRUCTIONSREFERTOSUPPLIEDSHEET)
DOUBLEDD603 MODELS
DD603 PREFINISHED(shownleft)
DD603 FLATDOOR(notshown)
DD6031 INTEGRATED(shownright)
SINGLE DS683 MODELS
DS603 PREFINISHED(shownbft}
DS603 FL£ DOOR(not shown}
DS6031 INTEGR£ED(shownright}
NOTE TO THEiNSTALLER
1. Readthese instructions completely and carefully.
2. installation of this DishDrawer® requires basic
mechanical and electrical skills.
3. Be sure to leave these instructions with the Customer.
4. At the completion of the DishDrawer® installation, the
installer must perform Final Check List as per Section 12
of these installation instructions.
5. Remove all packaging materials supplied with the
DishDrawer®.
6. This dishwasher is manufactured for indoor use only.
NOTE TO THECUSTOMER
Keep these Installation Instructions with your User Guide
for future reference. The DishDrawer® must be securely
anchored before # is operated.
Z_WARNING!
Before installing the BishBrawer@ , remove the house fuse or open
the circuitbreaker. Ensureall water connectionsare turned OFF.It is
the responsibilityof the plumber andelectrician to ensure that each
installationcomplieswith all Codesand Regulations.
Important!
These instructions must be followed precisely to ensure correct
venting and operation of the BishBrawer® . In the event of a fault
related to the incorrect installation, the installer will be liable for any
repairs.
important!
The BishBrawer® MUST be installed to allow for future removal
from the enclosure ff service is required.
important!
improperinstallationis not covered under the Warranty.
Important!
if the BishBrawer® is to be relocated from one installation to
another it must be kept upright to avoid damage from water spillage.

Fisher & Paykel DS603SS Specifications

General

Type	LCD Drawer
Model	DS603SS
Brand	Fisher & Paykel
Material	Stainless Steel
Color	Stainless Steel
Installation	Built-in
Control Type	Electronic
Number of Drawers	1
Dimensions (H x W x D)	595 x 570 mm

Summary

Before You Start

Electrical Preparation

Details regarding the switched power outlet location and requirements for the Dish Drawer installation.

Plumbing and Drainage Preparation

Instructions for water supply valve, pressure limiting valve, and drain hose extension kit.

Cavity Preparation

Guidance on applying moisture protection tape and securing the Dish Drawer within the cavity.

Electrical Information

Grounding Instructions

Ensures proper grounding for the appliance to reduce the risk of electric shock.

Double Models Services Specifications

Double Models Plumbing Options

Single Models Services Specifications

Single Models Plumbing Options

Moving the Product into the Cavity

Mounting Tab Options

Details on how to use the mounting tabs for securing the product to the cavity sides.

Optional Flexible Extrusion

Guidance on attaching flexible extrusions to the product for specific cavity dimensions.

Removing the Tub

Adjusting the Feet (Double Models Only)

Securing the Product

Electrical Connection

Refitting the Tub

Connecting the Drain Hose(s)

Drain Hose Connection Methods

Details for connecting drain hoses using a hose joiner or standpipe to prevent siphoning.

Drain Hose Support Installation

Instructions for attaching the drain hose support to prevent siphoning and kinking.

Connecting the Inlet Hose

Fitting the Toe Kick (Double Models Only)

Final Checklist

Customer Care