24
Cyclic and Compact operating instructions
Models: 525mm wide P120, E169T, C170T, C190, E240B, E249T, C270
(Compact Models)
635mm wide C373, E373, C450, E450
Temperature control
The control has been factory set for normal operating conditions.
Allow the refrigerator to run empty for 2 – 3 hours before placing food inside the fresh food or
freezer compartments.
Re-adjust the control as necessary to suit your individual preference.
1 is warmest setting
7 is coldest setting
We recommend adjusting the temperature by half a setting initially and then allow at least
24hours for the cabinet temperature to stabilise before re-adjusting.
If you are altering the temperature of a 2-door refrigerator, remember you are altering the
temperature of both compartments.
The running time and temperature are affected by where your refrigerator is located, how
often the door is opened and the temperature of the room the refrigerator is located in. Your
refrigerator is designed to operate in a room temperature of between 10°C and 43°C.
Fig.15 Temperature knob
warmer colder
To Next Page
Loading...
