Fisher & Paykel E521T - Ventilation and Cabinetry Requirements

6
3. Ventilation and installation
For all products with a freezer ‘drawer’ (RF522W and RF522A), refer to pages 8 – 9 for installation
instructions. For all products with a freezer ‘door’ refer to page 6 – 7 for installation instructions.

To ensure adequate ventilation for your refrigerator or vertical freezer, see recommended
cabinetry dimensions below.

To ensure adequate ventilation for chest freezers, allow a minimum of 20mm of airspace on each
side of the cabinet, and 30mm at the rear.

If integrating your refrigerator, follow installation instructions provided with the integration kits.
Installation instructions
Flush with refrigerator chassis – full door rotation
O
P
O
P
Flush with refrigerator door – 90° door rotation
O
P
Flush with refrigerator door – full door rotation