Fisher & Paykel EB60 Installation Instructions

Installation Instructions
1. Position the rails on the sides of the cabinet. Fix
with the screws provided, then extend the rails
completely.
• Position and fix the lock hook with the four
screws provided, as shown.
• If the coffee maker is installed over a warmer
drawer, use the top surface of this as a
reference to position the rails. In this case, there
2. Fix the power cable with the clip. The power cable
must be long enough to allow the appliance to be
pulled out from the cabinet to fill the coffee bean
container.
• The appliance must be earthed in compliance
with legislation.
• Electrical connections must be performed by a
qualified electrician following the instructions.
https://producthelp.fisherpaykel.com/au/Cook/Companion_Products/Built-in_Coffee_Maker/EB60DSXB2/Installation_Guide_E…
Updated: Tue, 25 Aug 2020 02:00:06 GMT
Powered by
1

Fisher & Paykel EB60 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	4 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Milk tank capacity	0.5 L
Appliance placement	Built-in
Water tank capacity	2.5 L
Coffee beans capacity	350 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	5
Quantity per pack	1 pc(s)
Current	10 A
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Cordless	No
Control type	Touch
Product color	Black, Stainless steel

Weight and Dimensions

Depth	480 mm
Width	596 mm
Height	458 mm