7
Operating your wall canopy
Touch control panel
This panel is located on the front part of the hood and includes the following functions:
Filter cleaning alert indicator (ref. A).
Activated regularly to alert of the need to clean filters and deactivated with a single press.
Timer button (ref. B).
The fan will operate for 15 minutes before automatically turning off.
Light button (ref. C).
Turns the lights ON and OFF. Press and hold button to adjust the level of light.
Power ON/OFF (ref. D).
Fan speed buttons (1st, 2nd and 3rd speed) (Ref. E).
Fig.1 Touch control panel
A B C D E
Using the automatic timer
To operate the automatic timer:
1
Select the fan speed.
2
Press the button for two seconds until the LED light blinks.
3
The timer will work for 5 minutes at the current speed and 5 minutes at each of the lower
speeds until coming to a complete stop. At the end of this time, the motor will stop and the
light will go out.
To cancel the timer: press the timer button once and the motor will stop.
To Next Page
Loading...
Need help?
General
