Need help?Do you have a question about the Fisher & Paykel ICON+ and is the answer not in the manual?
General| Product Category | CPAP Machine |
|---|---|
| Brand | Fisher & Paykel |
| Model | ICON+ |
| Therapy Modes | CPAP, AutoCPAP |
| Pressure Range | 4-20 cmH2O |
| Ramp | Yes |
| Heated Tube | Optional |
| Electrical Requirements | 100-240V, 50/60Hz |
Learn how to operate the device and navigate menus using the SmartDial.
Access and adjust device settings available to the patient.
Enter the Clinician Menu to access advanced device settings.
Select between CPAP and AUTO pressure modes for therapy.
Adjust the prescribed fixed or auto-adjusting pressure levels.
Control patient access to menu features via Simple or Advanced Mode.
Enable/disable SensAwake and adjust its pressure setting.
Configure the home screen to show pressure or time during therapy.
Configure the time zone for accurate compliance data reporting.
Access and interpret CMS and Patient reports for sleep data analysis.
Manually adjust altitude for models without automatic compensation.
View read-only service data like software version and error codes.
Delete patient sleep data from memory for accurate reporting.
Follow instructions for routine cleaning of the device.
Disinfect device parts for safe use with multiple patients.
Troubleshoot the device when there is no visible display or power.
Resolve issues with the device not delivering sufficient air.
Address 'Error' notifications displayed on the device's home screen.
Troubleshoot problems with the AlarmTunes feature.
Understand normal warmth of the heater-plate or water chamber base.
Identify and resolve water buildup indicating a chamber leak.
Diagnose and fix humidifier operation issues.
Troubleshoot pressure setting limitations.
Resolve issues with the ramp mode failing to activate.
To Next Page
