Need help?Do you have a question about the Fisher & Paykel Titan Aerotech OD302US and is the answer not in the manual?
General| Model Number | OD302US |
|---|---|
| Brand | Fisher & Paykel |
| Series | Titan Aerotech |
| Fuel Type | Electric |
| Self-Cleaning | Yes |
| Convection Cooking | Yes |
| Interior Light | Yes |
| Number of Oven Cavities | 1 |
| Oven Timer | Yes |
| Frequency | 60Hz |
| Installation Type | Built-In |
| Color | Stainless Steel |
| Oven Cooking Modes | Bake, Broil, Convection Bake, Convection Roast, Warm |
| Oven Cleaning System | Pyrolytic |
| Voltage | 240 V |
| Control Type | Electronic |
Essential safety precautions and warnings for servicing the oven, including electrical safety and ESD protection.
Lists and describes specialized tools required for servicing, such as static straps and diagnostic tools.
Details oven weights for different models and power ratings for various supply voltages and regions.
Specifies cavity dimensions and describes the location of the product's serial plate.
Explains the structure and meaning of the oven's model and serial numbers.
Describes the operation of convection, cooling, vent, broil, bake, and fan elements.
Details the smoke eliminator, throat element, temperature sensor, and halogen bulbs.
Covers door lock motor, temperature/function switch and LCD modules.
Details the clock module, power module, and power transformer.
Explains the cooling fan resistor, thermal limiters, isolating relay, and XY-capacitor.
Details the self-clean cycle and oven mode element/fan operating profiles.
Explains how to set the clock, use the mode dial, and select temperature.
Details the various cooking modes available on the oven, including True Aero, Bake, and Roast.
Covers the minute timer, delayed cooking, and automatic stop functions.
Covers user select modes, Sabbath mode, language, temperature scale, and alerts.
How to enter technician mode and navigate diagnostic options and selections.
Procedure to access and view the technical data log via a PC.
Troubleshoots unresponsive electrical components, buttons, and displays.
Diagnoses faulty LCD modules and specific double oven cavity messages.
Addresses under cooking, burning on top/bottom, and lack of heating.
Diagnoses slow heating, light issues, and specific error codes (F1-F7).
Procedures for tracing faults with cooling fans, oven cavity fans, and elements.
Diagnoses thermal limiters, door switches, and door lock assemblies.
Identifies faulty power modules in double ovens using fault codes.
Wiring diagrams for single and double oven USA models.
Wiring diagrams for single and double oven NZ/AUS models.
Wiring diagrams for single and double oven EU models.
Procedures for removing the oven from joinery and accessing control, back, and service panels.
Steps for reassembling the oven after component replacement, including checks.
Procedures for replacing switch modules, LCD modules, and clock components.
Procedures for removing and replacing the power module and power transformer.
Procedures for removing and replacing thermal limiters and the oven temperature sensor.
Procedures for replacing oven lamps and heating elements (Broil/Grill, Fan, Bake).
Procedures for replacing cooling fan, vent fan, oven cavity fan, and fan shroud.
Procedures for servicing oven runners, the oven door, and door disassembly.
Procedures for replacing the meat probe socket and oven door lock assembly.
Visual guides for locating key components in US/NZ/AUS and EU models.
To Next Page