21
Wash Cycles and Options
Spin Hold
Use the SPIN HOLD option to:
Remove drip dry garments from a mixed load before the
wash goes into spin.
Minimize wrinkling that is caused when clothes are left
sitting in the machine at the end of the cycle.
When SPIN HOLD is selected, your Ecosmart™ will pause
at the end of rinse, beep and the spin light will flash to
tell you that it is waiting for another instruction. Press
START/PAUSE to begin the spin.
Delay Start
Delay Start will delay the start of the wash cycle for
1, 3 or 9 hours.
Press DELAY START once for a delay of 1 hour. Press
again for 3 hours, a third time for 9 hours (and again to
return to normal).
Once you press Delay Start your Ecosmart™ will begin
the delay period, you do not have to press Start/Pause.
Be careful if using Delay Start for non-colorfast clothes as
dyes may run if the clothes are damp.
Your Ecosmart™ will not beep at the end of the cycle if
Delay Start is selected.
Clothes Care Safeguards
To avoid accidentally damaging your clothes, there are a few options that your Ecosmart™ will
not accept. For example, you cannot select a hot wash on Delicate or Wool cycles.
US
To Next Page
Loading...
Need help?
General
