Caring For Your Washer
When you have Finished Using your Washer
• Turn off the faucets to prevent the chance of flooding should a hose burst.
• Turn off the power at the wall.
Cold Water Washing
If you always wash with cold water, we recommend that a WARM or HOT wash be
used at regular intervals, eg every 5th wash should be at least a warm one.
Cleaning your Washer
Ensure the power is turned off at the wall before cleaning your washer.
• Clean the surfaces of your washer with a soft damp cloth only and wipe dry. Do not use scouring or spray
cleaners as they can damage the paint, plastic and panel surfaces.
• Clean the fabric softener dispenser after each cycle using warm soapy water.
• To remove the agitator for cleaning, unscrew the nut down the center of the agitator by turning anti-clockwise.
• The agitator must be fully pushed onto the shaft when refitting. Tighten the nut firmly by
hand. Ensure the agitator is not loose.
• The soft close lid is not designed to be removable for cleaning. Do not attempt to remove the lid.
https://producthelp.fisherpaykel.com/us/Wash/Top_Loaders/WashSmart/WA3927G1/User_Guide_WA3927G1/16_caring_for_…
Updated: Wed, 12 Apr 2023 06:15:46 GMT
Powered by
1
To Next Page
Need help?
General
