3. Clean your machine regularly using the ‘Drum Clean’ cycle.
4. Complete wash cycles at a wash temperature of 40°C or above at regular intervals (eg every 5th wash)
as washing in cold water increases the chance of scrud occurring (see below).
If you fill beyond the MAX mark, the fabric softener will be dispensed into the bowl
prematurely and contribute to scrud.
Scrud
Scrud is the name of the waxy build-up that can occur within any washer when fabric softener comes in contact
with detergent. This build-up is not brought about by a fault in the machine. If scrud is allowed to build up in the
machine it can result in stains on clothes and an unpleasant smell in your washer.
If you wash a particularly dirty load, we recommend putting the washer through a ‘Rinse’ cycle once the cycle has
finished and the load has been removed, to clean out any remnants from that cycle.
https://producthelp.fisherpaykel.com/au/Wash/Front_Loaders/WashSmart/WH8560P2/User_Guide_WH8560P2/09_Detergent…
Updated: Sat, 28 Mar 2020 16:47:08 GMT
Powered by
5
To Previous Page
Loading...
Need help?
General
