BEFORE YOU BEGIN
Three AA batteries are
required (included).
Batteries included
are for demonstration
purposes only.
For longer life, use
alkaline batteries.
Adult assembly
is required. You’ll need
a Phillips screwdriver
(not included) for
assembly and battery
replacement.
Keep these
instructions for future
reference as they
contain important
information.
Clean with
a damp cloth.
Do not immerse.
Set aside 15 minutes
for assembly.
INSTALL BATTERIES
Locate the battery door on the
underside of the car.
Loosen the screw in the battery door
and remove the door. Remove and
properly dispose of the batteries.
Insert three, new AA (LR6)
alkaline batteries.
Replace the battery door and tighten
the screw. Do not over-tighten.
15
CAUTION
This package contains small
parts. For adult assembly only.
WARNING!
Not to be used by children over
36 months (due to seat height).
x3
1,5V
AA
(LR6)
NOTE
Adult supervision required.
Never use near steps.
Choose areas for riding that are
free of obstacles.
Learn to stop safely.
Use with caution as this product
requires skill to operate safely
to avoid falls, collisions, and
injuries to yourself (the rider)
and others.
Maximum weight: 42 lb (19 kg).
Periodically inspect this product
for wear or damage. Check all
nuts and bolts, and tighten as
needed. Replace worn or broken
parts immediately.
To Next Page
Loading...
Need help?
General
