Need help?Do you have a question about the Fisher Scientific Isotemp Series and is the answer not in the manual?
General| Accessory Type | Temperature control accessories |
|---|---|
| Compatibility | Fisher Scientific Isotemp lab equipment |
| Temperature Range | Varies by model |
| Accuracy | Varies by model |
| Resolution | Varies by model |
| Display | Varies by model |
| Power Supply | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
Essential safety precautions to prevent accidents when operating Fisher Scientific incubators.
Key rules to follow during operation for user safety and equipment protection.
Defines the correct applications for the incubator and lists prohibited uses to prevent hazards.
Specifies the required ambient temperature, humidity, and atmospheric conditions for operation.
Details site conditions, ventilation, and surface requirements for proper incubator installation.
Step-by-step guide for securing the incubator using the anti-tilt anchor for stability.
Detailed overview of the features and specifications of gravity convection incubators.
Detailed overview of the features and specifications of forced air incubators.
Description of built-in safety features such as sample protection and dual fuses.
Procedures for cleaning and decontaminating the incubator's workspace before initial use.
Safety warnings and instructions for connecting the incubator to the AC power supply.
Detailed steps for connecting the incubator to a suitable and properly grounded power outlet.
Checks and procedures required before commencing incubator operation.
Step-by-step instructions for powering on and initiating the incubator's operational cycle.
Instructions for turning on the incubator and initiating its startup sequence.
Procedure for safely turning off and powering down the incubator.
Guide on how to set and adjust the desired temperature for the incubator's workspace.
Steps for initiating and performing temperature calibration for the incubator's sensors.
Instructions for safely shutting down the incubator for prolonged periods.
Safety precautions and required personal protective equipment for disinfection tasks.
Guidelines for regular and semi-annual inspections to ensure performance and safety.
To Next Page
