Need help?Do you have a question about the Fisher Scientific Isotemp 550 Series and is the answer not in the manual?
General| Control System | Microprocessor-based PID control |
|---|---|
| Interior Dimensions | Varies by model. See specific model datasheet. |
| Exterior Dimensions | Varies by model. See specific model datasheet. |
| Weight | Varies by model. See specific model datasheet. |
| Capacity | Varies by model. See specific model datasheet. |
| Display | Digital |
| Chamber Volume | Varies by model. See specific model datasheet. |
| Power Requirements | Varies by model. See specific model datasheet. |
| Safety Features | Over-temperature protection |
Explains the meaning of warning, caution, note, and hot surface symbols for user safety.
Details the furnace models, PID control, chamber material, heating elements, display, gas port, safety features, and button operation.
Specifies requirements for choosing a suitable location, including clearance and electrical power proximity.
Guides users through unpacking the furnace, identifying components, and reporting any issues.
Outlines steps for preparing the furnace for operation, including removing packing and installing accessories.
Explains the initial display sequence when the furnace is powered on.
Provides step-by-step instructions for setting the desired temperature for the furnace.
Details the procedure for calibrating the temperature display using an offset value.
Presents an example scenario demonstrating how to apply a display offset for accurate temperature reading.
Explains the "otc" error, indicating a detached or broken thermocouple, and necessary actions.
Details the "HIGH" display warning for over-temperature conditions and the automatic safety relay function.
Gives detailed, step-by-step instructions for replacing a faulty heater element in the furnace.
Outlines the procedure for safely removing and installing a replacement thermocouple.
Provides a table of common furnace symptoms, their probable causes, and recommended actions for resolution.
Lists available replacement parts for the furnace with their corresponding Fisher Scientific part numbers.
Details accessories and supplies available for use with the Isotemp Muffle Furnaces, including catalog numbers.
Summarizes key performance specifications such as operating range, temperature uniformity, stability, and timing metrics.
Details electrical requirements, power consumption, chamber volumes, and physical dimensions for each model.
Presents the electrical wiring diagram illustrating connections for heaters, controller, and safety components.
Explains the terms, conditions, and limitations of the manufacturer's warranty for the furnace.
To Next Page