Need help?Do you have a question about the Fisher BA-6000 and is the answer not in the manual?
General| Frequency response | 20Hz to 20kHz (±0.5dB) |
|---|---|
| Dimensions | 17.5 x 5.5 x 13.5 inches (W x H x D) |
| Weight | 28 lbs |
| Input Sensitivity (MM) | 2.5mV |
| Input Sensitivity (Line) | 150mV |
| Total harmonic distortion | 0.1% (at rated power) |
| Input sensitivity | 2.5mV (MM), 150mV (Line) |
List of components used for product packaging and protection during shipping.
List of included accessories such as legs, fans, and documentation.
List of parts comprising the external cabinet and chassis structure.
List of parts related to the unit's appearance, including knobs and decorative panels.
List of parts used for mounting and supporting internal chassis components.
Detailed list of components for the Power Amplifier Printed Circuit Board Assembly.
Detailed list of components for the LED Printed Circuit Board Assembly.
Detailed list of components for the Input/Meter Printed Circuit Board Assembly.
Detailed list of components for the Power Supply Printed Circuit Board Assembly.
Detailed list of components for the Speaker Select Printed Circuit Board Assembly.
Steps to follow before commencing any adjustments on the power amplifier board.
Procedure for adjusting the zero balance of the output voltage on the power amplifier.
Identification of common diodes used in the unit, showing cathode and anode markings.
Identification of common transistors used in the unit, showing pin configurations (B, C, E, S, D, G).
Identification of integrated circuits used, showing pin numbering and lead configurations.
To Next Page
