Fisher CA-2221 - Page 30

WARNING:
FISHER
CA-2221
* Specifications are subject to change without notice.
To
prevent
fire
or
shock
hazard,
do
not
expose
this
appliance
to rain or moisture.
— 18 —
SPECIFICATIONS
POWER AMPLIFIER SECTION
Continuous RMS sine wave power per channel
within stated bandwidth at no more than stated
distortion and with 8 chm Joad
Power Bandwidth
Total Harmonic Distortion at rated power
1.M. Distortion
Speaker Damping
PREAMPLIFIER SECTION
Frequency Response
Phono (20 Hz — 20 kHz)
Aux (20 Hz — 20 kHz)
Input Sensitivity and Impedance
Phono
Tape Monitor 1,2
Tuner
Auxiliary
Phono Max. Input Capability
Phono
Tone Control
Bass (100 Hz)
Treble (10 kHz)
Loudness Contour (100 Hz/10 kHz)
Hum and Noise {IHF Short Circuit, A Network)
Phono
Tape Monitor
Tuner
Auxiliary
Output Voltage and Impedance
Tape Out
GENERAL
Power Requirements
Dimensions (WxDxH)
Weight
30 Watts
20 Hz ~ 20 KHz
0.03%
0.03 %
50
£0.5 dB
+0.5 dB
2.5 mV/50 kQ
150 mV/50 kQ.
150 mV/50 kQ.
150 mV/50 kQ.
230 mV
+10 dB
+10 dB
+8 dB/+3 dB
80 dB
95 dB
95 dB
95 dB
180 mV/200 Q
AC: 110/220 V
200 W/250 VA
440 x 310 x 89.5 mm
7.6 kg