Fisher FM-P7 - FCRS Recording of the Radio

Protecting Important Recordings
If
a
new
recording
is
made
on
a
tape
which
has
already
been
recorded,
the
old
recording
is
automatically
erased.
@
8y
breaking
the
accidental
erasure
prevention
tabs
off
the
tape,
you
can
protect
important
recordings
from
being
erased
acci-
dentally.
if
you
want
to
record
on
a
tape
whose
tabs
have
been
broken,
place
a
piece
of
adhesive
tape
over
the
holes
(Fig.
41).
Fig. 41
a) SideA
b) Tab for side A
c) Tab for side B
d) Adhesive tape
Procedure
for
Automatic
Edited
Recording
1.
Load
the
disc
and
wait
for
the
total
number
of
tracks
and
totai
playing time to appear on the display. See “Checking the Number
of Tracks and Total Playing Time”.
Press the EDIT button to select the tape length.
— The length switches from 46 minutes to 60 minutes, 90 minutes,
then off each time the EDIT button is pressed.
— The auto space function is set automatically.
To
record
without
the
auto
space
function,
press
the
AUTO
SPACE
bution to turn the “SPACE” indicator off.
Press the CD REC button to begin FCRS recording.
2.
3.
4.
SIDE AB button
Press
this
button
repeatedly
to
switch
the
display
to
indicate
the
tracks
and
recording
times
for
sides
A
and
B
separately.
(Once
recording
starts,
the
display
switches
automaticatly
between
the
sides.)
The
display
mode
switches
from
“SIDE
AB”
to
“SIDE
A”,
then
“SIDE
B”
eachtime
the
SIDE
AB
button
is
pressed.
Example:
To
record
a
disc
containing
12
tracks
onto
a
C-46
tape
with
auto
edited
recording
and
the
auto
space
function
(Fig.
42)
Fig. 42
Example of tracks on disc
Space between tracks - 1 second
Playing time (minutes:seconds)
The
tracks
are
recorded
as
follows
onto
sides
A
and
B
of
the
C-46
tape.
Space between tracks - Approx. 5 seconds
Tracks recorded onto side A
Tracks recorded onto side B
Tape and CD operation
Space between tracks - Approx. 5 seconds
Quick reverse
SideA
Leader tape
m) Track 1
n) Track 2
Track 3
Track 4
Track 5
Non-recorded section
CD playback
Pause
Tracks
are
recorded
onto side
B
in
the
same
way.
Once
track
5
is
recorded
onto
side
A
of
the
tape,
the
deck
is
set
to
the
non-recording
mode
until
the
leader
tape
is
reached.
At
this
point,
the
quick
reverse
mechanism
switches
the
direction
of
playback
and
recording
continues
on
side
B.
The
display
on
the
CD
player
is
as
shown
in
Fig.
43
while
the
auto
space
function
is
creating
the
blank
space
on
the
tape.
Fig. 43
a) End of playback
b) Beginning of playback
Automatic
Edited
Recording
With
Other
Tape
Lengths
Example:
To
record
on
a
40-minute
tape
14.
Load
the
disc
and
wait
for
the
total
number
of
tracks
and
total
playing
time
to
appear
on
the
display.
2. Press direct search buttons “4” then “0”.
3. Press the EDIT button.
4. Torecord without the auto space function, press the AUTO SPACE
button to turn the “SPACE” indicator off.
5. Press the CD REC button to begin FCRS recording.
Procedure for Manual Edited Recording
1. Load the disc and wait for the total number of tracks and total
playing time to appear on the display.
Press the EDIT button.
Press the CLEAR button.
— The bracket(s) start flashing.
To record without the auto space function, press the AUTO SPACE
button to turn the “SPACE” indicator off.
Program the desired tracks. See “Programming Procedure”.
The brackets indicate which tracks are programmed.
if bracket is lit: Track programmed.
If bracket is flashing: Track can fit onto tape.
If bracket is off: Track cannot fit onto tape.
Once the tracks to be recorded on side A are set, the “SIDE A”
indicator switches to “SIDE AB”.
Tracks which do not fit on side A are recorded on side B.
Note that the program is cleared if the EDIT button is pressed
after the program is set.
Press the CD REC button to begin FCRS recording.
2.
3.
4.
5.
6.
Manual Edited Recording With Other Tape Lengths
Example: To record onto a 40-minute tape
41. Load the disc and wait for the total number of tracks and total
playing time to appear on the display.
Press direct search buttons “4” then “0”.
Press the EDIT button.
Press the CLEAR button.
To record without the auto space function, press the AUTO SPACE
button to turn the “SPACE” indicator off.
Program the desired tracks.
Press the CD REC button to begin FCRS recording.
FCRS Recording of the Radio
NO WRN
@ First tune in the station and adjust the recording level. See “Ad-
justing the Recording Level”.
@ if the TUNER REC button is pressed during recording, a blank
space of approximately 5 seconds is created and the deck is set
to the pause mode. Press the TUNER REC button again to resume
recording. Use this function to cut out narrations, commercials,
etc.
Use Deck 2. (Recording starts in the forward direction.)
However, if the DIRECTION MODE switch is set to the 4. position,
recording continues on Deck 1 after the tape in Deck 2 reaches the end.
1. Press the TUNER REC button to start recording when the program
you want to record begins.
To cut out narrations, commercials, etc.: (Fig. 44)
Fig. 44
a) Press the TUNER REC button.
b) The Deck 2 “TUNER REC” indicator lights.
c) The Deck 2 “TUNER REC” indicator flashes.
d) First time
e) Second time
f) Third time
g) 5-second blank space
h) Recording starts
i) Pause
j) Recording resumes
@ Tocreate a blank space of over 5 seconds, hold the TUNER REC
button in for the desired amount of time. The pause mode is set
when the button is released.
To pause without creating a blank space, press the Deck 2 PAUSE
button.
To resume recording, press the PAUSE button once again.
To cancel the recording mode, press the Deck 2 STOP button.