Fisher LCP200 - Page 12

Instruction Manual
D104296X012
LCP200 Local Control Panel
August 2018
12
Figure 8. Wiring Diagram 3, HART LOOP-Powered Configuration, Multi-Drop
GG22618 SHEET 3
NOTES:
1 OPTIONAL CABLING TO RESET, TRIP AND TEST CONTACTS. SHOWN ABOVE IS CABLING TO
1 RESET CONTACT.
2 CONNECT EITHER NO-C OR NC-C TERMINALS OF RESET, TRIP AND TEST CONTACTS. SHOWN
1 ABOVE IS RESET NO-C TERMINALS.
3 USE METAL CONDUIT FOR CABLING BETWEEN DVC6200 SIS AND LCP200 AS EMI SHIELD.
4 THE DIGITAL INPUT DOES NOT NEED TO BE CONNECTED FOR THE LCP200 TO OPERATE.
LOGIC SOLVER
(USER SUPPLIED)
LCP200
1
DVC6200 SIS
TERMINAL BOX
DIGITAL IN
OUTPUT
24 VDC
2
LC340 LINE
CONDITIONER
TALK
AUX LOOP
OUT
CAL
AUX LOOP
DVC6200 SIS
TEST TRIP
NOT
AVAILABLE
RESET
24V
POWER
4
FLD
SYS
3