Do you have a question about the Fisher RS-913 and is the answer not in the manual?
Details specifications for the wireless remote control unit.
Specifies performance metrics for the power amplifier stage.
Details input sensitivity, impedance, and frequency response.
Outlines performance characteristics of the FM tuner.
Lists performance metrics for the Medium Wave tuner.
Details performance characteristics for the Long Wave tuner.
Covers power requirements, dimensions, and weight.
Important warnings and notes before performing RF adjustments.
Procedure to align the FM IF S-curve for optimal performance.
Steps to align FM RF frequency coverage at 87.5MHz.
Steps to align FM RF frequency coverage at 108MHz.
Procedure for aligning FM RF tracking at 88MHz.
Procedure for aligning FM RF tracking at 108MHz.
Adjusting the detector for minimum total harmonic distortion.
Steps to align the AM IF stage.
Aligning MW RF frequency coverage at 1611kHz.
Aligning MW RF frequency coverage at 522kHz.
Aligning LW RF frequency coverage at 360kHz.
Aligning LW RF frequency coverage at 153kHz.
Steps to align MW RF tracking at 603kHz.
Steps to align MW RF tracking at 1404kHz.
Steps to align LW RF tracking at 160kHz.
Steps to align LW RF tracking at 350kHz.
Adjusting the sensitivity for the AM auto stop feature.
Procedures for adjusting the power amplifier.
Guide for adjusting the idling current for optimal performance.
List of components for the RF Main Printed Circuit Board.
Components for the Control Printed Circuit Board.
Components for the Pre Amplifier Printed Circuit Board.
Visual representation of the TMP47C870N-4627 IC's internal structure.
Diagram illustrating the internal functions of the LC7821 IC.
Block diagram showing the LM7000 IC's architecture.
Block diagram detailing the LA3401 IC's functionality.
Measured DC voltages for various integrated circuits.
Measured DC voltages for various transistors.
Bottom view layout of the Control Printed Circuit Board.
Bottom view layout of the AC Switch Printed Circuit Board.
Bottom view layout of the Master Volume Printed Circuit Board.
Bottom view layout of the Sub Trans Printed Circuit Board.
Illustrates internal wiring connections between P.C. boards.
Identifies the pinout (Base, Collector, Emitter) for various transistors.
Identifies the pinout for various integrated circuits.