Fishman Fluence series - Universal Battery Pack Install

Components:
1. Existing control cover (not included)
2. Li-Ion battery pack
3. Rechargeable Universal Module
4. Power leads
Universal Battery Pack Install & Wiring
1
3
2
Drill 1/2 inch hole in
control cavity cover
Remove adhesive backing before pressing into place
onto the back of the control cavity cover.
How to Install Battery Pack:
1. Remove adhesive backing on Li-Ion
battery (2) and Rechargeable Universal
Module (3).
2. Attach Universal Module (3) to control
cover (1)
3. Attach Battery (2) to control cover (1)
Do Not Puncture Battery!
9