Need help?Do you have a question about the Fishman Isys III and is the answer not in the manual?
General| Power Supply | 9V battery |
|---|---|
| Low Battery Indicator | Yes |
| Notch Filter | Yes |
| Phase Switch | Yes |
| Controls | Volume, Bass, Treble |
| Outputs | 1 x 1/4" (6.35 mm) jack |
| EQ | Bass, Treble |
| Power | 9V |
| Type | Onboard Preamp System |
Set volume to off and bass, middle, and treble controls to the center position.
Connect the Isys III to an amplifier or PA using a 1/4-inch instrument cable.
Press the tuner button; it mutes the signal. Press again to exit.
Raise the volume and adjust bass and treble controls to achieve desired sound.
Set volume knob high as possible without distortion for the cleanest signal.
Boost to add depth and weight to the guitar's sound.
Adjust for a 'scooped out' tone or add midrange 'bite'.
Boost to cut through the mix; cut to mellow and subdue the sound.
Use tuner lights for tuning. Conserve battery by unplugging when not in use.
To Next Page