Need help?Do you have a question about the Fishman PRESYS I and is the answer not in the manual?
Set volume off and the contour control to off (button out).
Connect the Presys I to an amplifier or PA with a -inch instrument cable.
Press the tuner button. When it's on, the tuner mutes the signal. Press again to exit.
Raise the volume and adjust the contour control to your liking.
Set the volume knob as high as possible for the cleanest signal, without causing distortion or feedback.
A one-button control for a natural sound (out) or a "Scooped" sound (in).
Improves bass response at low volume and suppresses feedback at high volume.
Use the tuner lights to tune your instrument.
Set volume off and bass and treble controls to center.
Connect the Presys II to an amplifier or PA with a -inch instrument cable.
Press the tuner button. When it's on, the tuner mutes the signal. Press again to exit.
Raise the volume and adjust the bass and treble controls to your liking.
Provides a USB 2.0-compliant digital audio output for direct connection to a computer.
Details on Volume, Bass, Treble, Phase, and Tuner operations.
Statement regarding compliance with FCC limits for Class B digital devices.
Declaration of compliance with essential requirements of Directive 2014/30/EU.
To Next Page
General