Need help?Do you have a question about the Fishman PRESYS PLUS and is the answer not in the manual?
Set volume high for clean signal; notch filter reduces low-end feedback.
Adjust Bass, Middle, and Treble for desired tone shaping.
Adds high-frequency shimmer or reduces finger noise and fret buzz.
Improves bass response and suppresses feedback at high volume.
Use tuner lights to tune instrument accurately.
Batt light indicates low battery; replace by opening preamp body.
Adds fullness to the bass and definition to the treble for a clear tone.
Emphasizes extreme bass and treble by reducing midrange frequencies.
A good setting for strumming chords.
Ensures you are heard through a loud band.
Widen endpin hole to 15/32" to accommodate the output jack.
Drill 3/32" hole in saddle slot for pickup wire, no less than .100" from string.
Position preamp on flat surface allowing internal clearance; cut cavity using template.
Attach preamp to guitar using supplied screws and mounting brackets.
To Next Page
General