Suggested EQ Settings Cont’d ...
Mid-Cut
You can scoop out harsh midrange by
setting the Frequency knob at about
12:00 and the Contour (level) slider
cut to taste below the center detent.
Often the desired mid-cut will fall into
the same frequency range as poten-
tial microphone feedback. You can
also cut midrange (pickup only) by
boosting the BASS and TREBLE slid-
ers to realize an "implied" mid-cut at
800 Hz.
Fingerstyle
This setting will add fullness to the bass
and definition to the treble.
Prefix -
Prefix -
Stereo Blender
Stereo Blender
10
10
To Next Page
Loading...
