Fishman TRIPLEPLAY FC-1 User Manual

Front Panel (cont’d)
Programmable Foot Switches
Each of the three foot switches will execute a MIDI command that can be customized using the FC-1
Utility found in the TriplePlay Application software. Corresponding Soft labels in the display will
update to reect the chosen MIDI command.
Patch – This programmable foot switch defaults to MIDI CC68 which is used to decrement Triple-
Play Hardware Patches.
Patch + This programmable foot switch defaults to CC67 which is used to increment TriplePlay
Hardware Patches.
Hold This programmable foot switch defaults to CC66 which is used to trigger the assignable hold
feature within each Hardware Patch.
Tuner Press the patch – and patch + foot switches simultaneously to enter tuner mode. The three
LEDs below the LCD display indicate sharp, at and in-tune while the LCD provides additional tuning
detail such as the note being played and hi-resolution tuning information.
Settings Press the patch + and hold foot switches simultaneously to access FC-1 settings where
you can adjust TriplePlay pickup levels and calibrate the expression pedal.
4

Fishman TRIPLEPLAY FC-1 Specifications

General

Brand	Fishman
Model	TRIPLEPLAY FC-1
Category	Recording Equipment
Language	English