Reference 20FEB2018 Pg 2 of 16 Copyright 2018 Fishmaster
IMPORTANT NOTES ON INSTALLING AND USING
YOUR NEW FISHMASTER T-TOP
Read the entire instruction manual before beginning.
For future maintenance you may want to grease the threads with marine
grade grease. Your T-Top should arrive with grease on the threads, if not,
please grease before use.
Note you are installing from the Bases up. First install the bases, then the
standoffs and then the top canopy frame.
Re-torque all hardware after each of the first few uses and then check
regularly.
The Fishmaster T-Top is silent by design, if you hear any rattling or noise
at all, then check all hardware for tightness.
Begin by ensuring you have a protected surface to assemble the parts of
the T-Top so they will not be damaged. The packaging bubble wrap and
cardboard work great, just spread out to create a protected work area.
Grass and carpeted areas are additional options.
Always drill in reverse in fiberglass, and only 1” deep to make sure you do
not drill into tanks or cables.
Read the entire instruction manual before beginning for a fast, trouble free
installation.
Call us at 877-777-8693 or email us at Support@Fishmaster.com if you have
any questions or concerns during the installation.
Send us a picture of your boat after installing your T-Top and we’ll send
you a free Fishmaster T-Shirt. Remember to include your shirt size and
mailing address. Please email your pictures to us at
Support@Fishmaster.com.
To Next Page
Loading...
