23
Open the print setup window again and select the template of printer according to
the purchase made. Enter the temperature from 8 to 12 (above or below may have an
unsatisfactory result), in the ribbon direction, keep 270 degrees, number of ribbons
and repeats that will be printed.To reach this number, follow the rule as example for
50 meters: 50/0.100 = 500 that we must insert in fix number.
Recommendations for printing on black film:
xPrinting temperature: Adjust the temperature between 10 and 12;
Printing Speed: Adjust the speed between 2 and 3;
To Next Page
Loading...
Need help?
General