03
SECURITY INSTRUCTIONS
Please, read carefully the following instrucions.
1. Keep the printer in a clean and airy place, away
from dust and moisture;
2. Use only genuine supplies;
3. Before connecting the device to an outlet, check power
supply voltage;
4. Make sure the printer is turned off before plugging the
power connector into the outlet;
5. Plug your printer into a dedicated outlet(avoid sockets rulers
and power adapters);
6. In case of places with power instability,we recommend to
use stabilizers and nobreaks;
7. Clean the print head and main roller at each film change using
cotton and alcohol 99% isopropyl. Never clean your printer with
wateror common cleaning products;
8. Do not place boxes, weights or liquids on top of your printer;
9. Always keep your printer closed to avoid dust inside your printer;
10. For security and warranty reasons, only qualified technical
person must open the equipment;
11. Do not repair or adjust energized equipment under
any circunstances.
To Next Page
Loading...
Need help?
General