First use
1. Open the packaging, remove everything from the box, and place
the treadmill on a flat surface. Follow the safety warnings above.
2. Connect the treadmill to a power outlet using the provided power
cable, and flip the switch.
3. Insert the supplied button cell battery into the remote. You can
find the battery in the packing slip, on the outside of the box.
4. Remove the protective film from the display.
5. Press the ON/OFF button to turn the treadmill on and off.
6. Press the PLUS and MINUS buttons to adjust the speed.
Additional instructions
Handlebar and phone holder
You can use the handlebar to hold onto or place your phone on. Lift the
handlebar and screw it securely on both sides. Slide the phone holder
horizontally onto the mounting knobs on top of the handlebar.
Connecting to your phone
When the treadmill is turned on, you can connect to it via Bluetooth in
your phone settings. Afterward, you can use the built-in speaker. If you
play music or a podcast on your phone, it will be played through the
speaker on the treadmill. You can now also use the FitShow app.
Automatic shutdown
To comply with European safety guidelines, the treadmill will
automatically shut down after 50 minutes. This is for safety and to
reduce power consumption, preventing it from remaining on
accidentally. You can turn the treadmill back on immediately.
FitFirst® Treadmill Jogger 4
To Next Page
Loading...