FitTrack Atria - Low Battery and Charging; Firmware Update; Restart the Bracelet

8
Disconnect Atria with the FitTrack Health App
1. Tap ”Profile” (1st icon from the right) on the bottom menu bar and click on
”Devices”.
2. Swipe right on your device name
3. Tap Delete
4. Go to Phone Settings > Bluetooth > Forget Device
*Note: Choosing “RESET ALL” in the app will delete all data from your device. Previous data will reset to zero.
Low Battery and Charging
Low Battery:
When the battery is low, Atria will not vibrate during measurements or for notification
alerts. When the battery is depleted, Atria will automatically shut down.
Charging:
Atria will automatically turn on when sufficiently charged and display the homepage.
While charging, the battery icon will flash.
Firmware Update
Use the FitTrack Health app to keep Atria’s firmware version up to date. If an up-
date is available, you’ll be prompted to install it.
Restart the Bracelet
On the watch:
1. Keep swiping left to ”Settings”
2. Scroll down to ”Restart”
1. Tap ”Profile” (1st icon from the right) on the bottom menu bar and click on