M O U N T I N G T H E A M P L I F I E R
1. Find a suitable location in your car in which to mount the amplifier.
2. Ensure there is sufficient air circulation around the mounting location.
3. Mark the location for the screws holes by placing the amplifier where you need to install it.
4. Use a mounting screw or a scribe instrument, inserted through all amplifier's mounting holes, to
mark the surface of installation. If the mounting surface is carpeted, please, use a felt tip pen to
measure the hole centers,
5. Drill pilot holes in the marked mounting surface for the installation screws. Put the amplifier on the
mounting surface securely using screws.
9
To Next Page
Loading...