FläktGroup eQ PRIME 018

Need help?

Do you have a question about the FläktGroup eQ PRIME 018 and is the answer not in the manual?

Summary

Safety Regulations

General Safety Warnings

Important warnings regarding commissioning and operation safety.

Main Circuit Breaker Safety

Guidelines for the main circuit breaker and safety circuit breaker.

Commissioning Procedures

Handheld Terminal Operation

Handheld Terminal Navigation

Guide to navigating and changing values on the handheld terminal.

Air Handling Unit: Inputs and Filters

Inputs and Filter Monitoring

Detailed information from inputs and filter monitoring settings.

Air Handling Unit: Fire Protection

Fire Protection Unit Connections

Connecting and configuring fire protection signals for the eQ PRIME.

Air Handling Unit: Fan Control

Fan Control Settings

Adjusting all necessary fan settings via the Fan control menu.

Air Handling Unit: Temperature Control

Temperature Control Settings

Air Handling Unit: Humidity Control

Humidity Control Settings

Air Handling Unit: Operating Hours and Alarms

Alarm Management

Sensor Calibration and Settings

Pressure and Flow Sensor Setup

ReCooler HP System

ReCooler HP Operation Status

ReCooler HP Hand Terminal Interface

Web Interface Configuration

TCP;IP Settings for Web Interface

Alarm Guide

General Fault Tracing Steps

Steps for diagnosing and troubleshooting alarms using the handheld terminal.

Updating from an SD Card

Loading Configurations from SD Card