FläktGroup eQ PRIME 032

Need help?

Do you have a question about the FläktGroup eQ PRIME 032 and is the answer not in the manual?

Summary

Safety Regulations and Precautions

General Warning and Precautions

Important safety warnings and precautions before commissioning the unit.

Commissioning Process and Checks

Initial Unit Checks

Checks for unit installation, cleanliness, and component placement.

Control System Configuration

Customizing control system settings using the handheld terminal.

Handheld Terminal Operation and Navigation

Air Handling Unit Functions and Settings

Unit Inputs, Safety, and Fire Protection

Unit inputs, filter monitoring, fire protection, and shutdown procedures.

Operating Modes and Scheduling

Selecting operating modes and configuring internal/external schedulers.

Temperature and Humidity Control

Setting main setpoints, fan control, temperature, and humidity control.

Sensor Calibration and Configuration

Configuring and calibrating pressure/flow sensors for accurate measurement.

ReCooler HP System Overview

ReCooler HP Operation Modes

Web Interface and Network Access

Troubleshooting and Common Questions

Display and Flow;Pressure Issues

Temperature, Heater, and Operation Issues

Alarm Guide and Fault Diagnosis

General Fault Tracing and Alarm Checks

Procedures for checking alarms, connections, and component functions.

Fire, Fan, and Filter Alarms

Alarms related to fire protection, fan deviations, filter pressure, and fan faults.

Temperature, Humidity, and Rotor Alarms

Alarms for temperature sensors, humidity deviations, frost protection, and rotor issues.

Configuration, Communication, and Pressure Alarms