Flama 1706FL - Cleaning and Maintenance

17
English
DESCRIPTION
1. Motorized base
2. Cup
3. Blade
4. Chopper lid
5. Central column
6. Power switch
7. Blender cup
8. Pressure ring
9. Blender cup lid
CLEANING AND MAINTENANCE
Before cleaning, remove the power cable
from the electrical socket.
Never submerge the motorized base in
water or any other liquid, and do not put
it in the dishwasher. Clean only with a so,
damp cloth.
With the excepon of the motorized base,
all other accessories may be washed with
lukewarm water and normal dish detergent,
or they may be washed in the dishwasher
so long as the temperature does not exceed
65°C (150°F).
To clean the blade (handle with care), place
it under a strong ow of hot, running water.
We recommend using a brush to avoid
direct contact with the blade.
If any parts should become stained aer
contact with certain foods (such as oranges
and carrots, for example), the stains can be
removed using a cloth soaked in cooking oil.
All parts that come into contact with foods
should be washed immediately aer use.
USE AND CARE
Never run the appliance empty.
The nish and the power cable should
not have any scratches or separaons. Do
not use the appliance unless all parts are
correctly installed. If such situaon should
occur, immediately unplug the appliance
from the electrical socket and go to an
authorized technical assistance service to
perform the necessary vericaon.
Never submerge the motorized base in
water or any other liquid.
Aer use, fully clean all accessories that
came into contact with food; to do so,
follow the suggesons and instrucons
described in detail in the “Cleaning and
maintenance” secon.
Do not use foods heated to temperatures
above 50°C (122°F).
The food should never exceed 2/3 of the
capacity of the cup.
Do not put very watery or juicy foods, such
as tomato, into the cup.
Do not aempt to chop hard (coee beans,
shells, bones, etc.) or frozen foods.
To avoid cung yourself, do not place your
ngers close to the blade. Never use your
ngers to remove food debris; instead, use
appropriate accessories.
Wait for the blade to come to a full stop
before removing the lid.
Do not use the appliance if any installed
accessories or consumables are damaged.
Replace them immediately.
Do not force the appliance’s working
capacity.
This appliance was designed exclusively
for domesc use, not for professional or
industrial use.