Flama 1706FL - Troubleshooting

20 www.ama.pt
pressure ring.
To stop the appliance, just release the
pressure ring.
Wait unl the blade has come to a full stop
before removing the lid or blender cup
from the motorized base.
If you wish to add more food to the blender
cup during the blend cycle, turn o the
appliance and use the hole in the blender
cup lid.
Notes:
- To cut solid foods, add liquid (water, broth,
milk, etc.) without exceeding the indicated
maximum ll level.
The blender cup is appropriate for blending
vegetable soups; mayonnaise; milkshakes;
drinks, etc.
The blender cup is not appropriate for
beang egg whites, making mashed
potatoes or chopping raw foods.
TROUBLESHOOTING
Problem Cause Soluon
The appliance does not
work.
The appliance is not
plugged into the electrical
socket.
Connect the appliance to the
electrical socket.
There is a slight burning
smell during operaon.
First uses.
This is normal and will
disappear aer the rst few
uses.
Motor unit is overloaded.
Adhere to the indicated
quanes.
The device switches o
during operaon.
Motor overheang.
Unplug the appliance from
the electrical socket and wait
30 minutes before plugging it
in again.
The blade does not
rotate.
Poor appliance assembly.
Follow the instrucons in the
“Use and care” secon.
Pieces are too big.
Cut the ingredients into
smaller pieces.