Flama 1817FL - Troubleshooting; Protecting the Environment

36 www.ama.pt
ANOMALIES AND REPAIR
In case of malfuncon, please take the appliance to an authorized Technical Assistance
Service. Do not aempt to disassemble or repair the appliance, as this may be dangerous.
PROTECTING THE ENVIRONMENT
This symbol indicates the separate collecon of electrical and electronic
equipment.
The main objecve of the separate collecon of this waste is to reduce the
quanty to be disposed of, promote re-use, recycling and other forms of recovery
in order to reduce its negave eects on the environment.
When it is no longer in use, this appliance must not be disposed of together with other
unsorted municipal waste.
The user is responsible for delivering it free of charge to the selecve collecon facilies
available for that purpose.
Pieces of equipment that are no longer in use can also be taken back at points of sale, by
purchasing new pieces of equipment that are equivalent and have the same funcons.
For more detailed informaon on collecon points, please contact your City Council or a
point of sale for this equipment.
TROUBLESHOOTING
Problem Cause Soluon
The microwave
cannot be turned
on.
The power cable is not
well connected.
Remove the plug from the wall socket.
Plug it in again 10 seconds later.
There is a burnt fuse or
a breaker has tripped.
Replace the fuse or reset the breaker
(repaired by a professional from our
company).
Problems with the
plug.
Test the wall socket with other electrical
appliances.
The microwave
doesn't heat up.
The door isn't well
closed.
Close the door well.
The glass rotang
plate makes
noise when the
microwave is
working.
The rotang support
and base of the
microwave are dirty.
See the secon on Cleaning and
Maintenance.