flamco Flexcon C/K User Manual

Flexcon
®
C/K
ENG Installation and operating instruction 6
DEU Montage- und Bedienungsanleitung 8
NLD Montage- en gebruikshandleiding 10
FRA Installation et mode d’emploi 12
ESP Instrucciones de instalación y funcionamiento 14
ITA Istruzioni d’installazione e d’uso 16
SWE Instruktioner för installation och drift 18
NOR Installasjons- og bruksanvisning 20
FIN Asennus-ja käyttöohjeet 22
DAN Monterings- og driftsvejledning 24
POL Instrukcja montażu i obsługi 26
RUS Инструкции по установке и эксплуатации 28
CES Návod k instalaci a obsluze 30
SLK Návod na montáž a obsluhu 32
HUN Telepítési és üzemeltetési útmutató 34

flamco Flexcon C/K Specifications

General

Brand	flamco
Model	Flexcon C/K
Category	Heating System
Language	English

Summary

General Information

Product Application

Details the intended use of Flexcon C/K expansion vessels in closed heating and cooling systems.

Safety Precautions

Highlights safety measures, including pre-charge, bracket strength, and preventing overpressure.

Installation Guide

Vessel Fitting and Mounting

Describes how to mount expansion vessels based on their capacity and available brackets.

Initial Operation

Pre-charge Check and System Filling

Details steps for checking pre-charge pressure and filling the system.

Maintenance and Service

Annual Maintenance and Service

Recommends annual checks by approved personnel for maintenance and service.

De-installation Procedure

Steps for Vessel Removal

Outlines the process for safely removing the expansion vessel from the system.