Need help?Do you have a question about the flamco Logotherm LogoTronic Hub OTC and is the answer not in the manual?
General| Brand | flamco |
|---|---|
| Model | Logotherm LogoTronic Hub OTC |
| Category | Control Systems |
| Language | English |
Provides essential safety, installation, commissioning, and maintenance information for proper equipment use.
Details the mains power cable connection, plug type, and hard-wiring requirements for the device.
Provides an overview of device configuration, showing keys (A, B) and LED indicators.
Details how keys A and B are operated (press/hold) and the resulting incidents in different application modes.
Explains the meaning of LED states (OFF, ON, FLS, FLF) and provides a status table for normal operation and updates.
Explains message structure, start/end points, device addressing, and the role of error checks like CRC and parity.
Details the pinout and connection of the RS-485 interface (CON29) on the circuit board for communication.
Explains how to switch between HFC and Modbus protocols and set the controller to client or server mode using keys.
Provides factory default RS-485 interface settings (8, N, 1, 9600 Baud) and notes for system integrators.
To Next Page
