© 2018 Flamco group. All rights reserved.
We reserve the right to change designs and technical specifications of our products.
Errors and omissions excepted.
Product: Flamco Pressurisation Equipment and branded Derivatives
Description: Sealed system pressurisation equipment, dosing equipment and combinations thereof.
Statement:
The above-mentioned products are manufactured in The UK and comply with the essential requirements of the applicable
directives, including but not limited to:
Pressure Equipment Directive 2014/68/EU
Sound Engineering Practice
RoHS Compliance
Additional Information:
All appropriate components bear the CE mark prior to assembly, and are bound by their individual applicable directives
including but not limited to:
Pressure Equipment Directive 2014/68/EU
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Machinery Directive 2006/42/EC
CE Marking:
Under the regulations and guidelines CE marking of the assembled pressurisation unit is not permitted.
Rob Clemson BEng Hons MIET Chartered Engineer
Technical Director
Flamco Limited
To Next Page
Loading...
