CONNECTING THE GAS CYLINDER TO THE APPLIANCE
This appliance is only suitable for use with low-pressure LPG, fitted with the appropriate low-
pressure regulator via a flexible hose. The hose should be permanently secured to the regulator
and the appliance. This barbecue is set to operate a 2.75 kPa regulator. The regulator assembly
supplied with this BBQ is of an approved type.
Regulator and Hose
These items are supplied with the barbecue, but replacements are available from your equipment
retailer or an authorised LPG gas stockist. Use only regulators and hose approved for LP Gas at
the above pressure. The life expectancy of the regulator is estimated as 10 years. It is
recommended that it the regulator is changed within 10 years of the date of manufacture.
The use of the wrong regulator or hose is unsafe
; always check that you have the correct items
before operating the barbecue.
The hose used must conform to the relevant standard for the country of use. The
length of the hose must be 1.5 metres (maximum). Worn or damaged hose must be
replaced. Ensure that the hose is not obstructed, kinked, or in contact with any part
of the barbecue other than at its connection. It is recommended that the gas hose by replaced by
an authorised person every 5 years.
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed
from the appliance. When the appliance is not to be used for a period of time it should be stored in
its original packaging and stored in a dry dust free environment.
Gas Cylinder
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the
cylinder must be disconnected.
Cylinders must be stored outdoors in an upright position and out of the reach of children. The
cylinder must never be stored where temperatures can reach over 50°C. Do not store the cylinder
near flames, pilot lights or other sources of ignition. DO NOT SMOKE.
This barbecue is designed for use outdoors, away from any flammable materials. It
is important that there are no overhead obstructions and that there is a minimum
distance of 1 m from the side or rear of the appliance. It is important that the
ventilation openings of the appliance are not obstructed. The barbecue must be
used on a level, stable surface. The appliance should be protected from direct draughts and shall
be positioned or protected against direct penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer or his agent must not be altered by the user. No
modifications should be made to any part of this barbecue and repairs and maintenance
should only be carried out by an authorised person.
Connection to Appliance
Before connection, ensure that there is no debris caught in the head of the gas cylinder, regulator,
burner and burner ports. Spiders and insects can nest within and clog the burner/venturi tube at
the orifice. A clogged burner can lead to a fire beneath the appliance.
Clean burner holes with a heavy-duty pipe cleaner.
To Next Page
Loading...