17
LFO - WAVE (waveforms)
4. PL1 (PULSE 1 - square wave pulse)
Rectangle pulse waveform with a duty cycle of 30 to 70%.
5. PL2 (PULSE 2 - square wave pulse)
Rectangle pulse waveform with a duty cycle of 25 to 75%.
6. PL3 (PULSE 3 - square wave pulse)
Rectangular pulse waveform with a duty cycle of 10 to 90%.
7. do1 (Down 1 - falling sawtooth)
Linear sloping sawtooth.
8. do2 (Down 2 - Decay waveform)
Logarithmic medium fast decay waveform (slowing down).
9. do3 (Down 3 - Decay waveform)
Logarithmically decaying decay waveform very quickly (slo-
wing down).
10. doE (Down Exponential - falling waveform)
Exponentially decaying waveform (getting faster).
11. UP (rising sawtooth)
Linear increasing waveform.
12. UPL (ascending waveform)
Logarithmically rapidly increasing waveform (slowing
down).
1. Sin (Sinus)
Classic sine waveform. With the help of this waveform, flo-
ating or evenly rising and falling effects can be created.
2. tri (Triangle)
Classic triangle waveform. With the help of this waveform,
floating or evenly linear rising and falling effects can be cre-
ated.
3. Sqr (Square)
Square waveform with 50% duty cycle.
Each LFO has 26 different waveforms. Briefly press the WAVE button. Then, after
releasing the button, change the waveform of the currently selected LFO by turning the
dial.
The following waveforms are available:
To Next Page
Loading...
