The connection is performed using
power cable with PowerCon connector
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100~240V 350W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
User Manual •Instrukcja Obsługi
To Next Page
Loading...
