Flash DJ Series - Device Operation and Menu Functions; Display Button Functions

Using lamp, the change rate of power voltage should be within ±10%,
if the voltage is too high, it will shorten the light’s life.
Input Voltage Frequency Total Power
100-240[V] AC 50/60[Hz]
250[W]
Voltage Specicaon.
6
Key and display funcons
DMX
Controller
DMX 512 DMX 512 120
Ω
Diagram of connecon of devices by DMX cable.
IMPORTANT! The maximum number of devices connected
in series via power cable is 5 pcs.
The connecon is performed using power cable with powerCON con-
nector (included). The device must be operated by qualied personnel.
CAUTION! In the case of cable damage do not aempt to repair. Repla-
cement or repair can be made only on the manufacturer or by a person
with appropriate permissions
MENU
UP DOWN ENTER
DISPLAY