DMX
Controller
DMX 512 DMX 512
LED Moving Head 60W Spot ver.12.2021 • Art No P7100549
•
• Power consumption: 80W
•
•
• TILT range: 202
• Angle: 11
•
5.1 Connecting DMX signal
The connection is performed using cable with
5. CONNECTION
•
•
• 9/11 DMX channel mode.
•
•
•
•
The device is equipped with the following
interfaces:
1
3
2
2
FEMALE
GROUND
DMX +
DMX -
MALE
3
1
CAUTION!
has to be terminated with a terminator. Solder
1
FEMALE
DMX +
DMX -
MALE
2
3
4
5
1
2
3
4
5
The unit should be mounted via its screw
holes on the bracket. Always ensure that
the unit is firmly fixed to avoid vibration
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to
support a weight of 10 times of the unit’s
4. INSTALLATION
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit
when installing the fixture. The equipment
must be fixed by professionals. And it must
be fixed at a place where is out of the touch
of people and has no one pass by or under
it.
To Next Page
Loading...